Anemometer UNI-T UT363S

Description

Anemometer UNI-T UT363S

This product comes with a 3-year warranty.

The UNI-T UT363S anemometer is a small, stable and reliable hand-held instrument for measuring wind speed and temperature with a separate speed sensor, which ensures fast detection, low consumption and high accuracy. The device can be used in many areas – such as mining, petrochemicals, energy, navigation – in aviation and shipping, in the manufacture of fans or the installation of exhaust ventilation and air recuperation, and in sports. Resistance to falling from a height of 1m. Backlit LCD display with dimensions of 35x32mm, with a four-digit display of wind speed and a simultaneous three-digit display of wind temperature. Battery powered 3x 1.5V batteries (AAA), automatic shutdown after 5 minutes of inactivity, which can be deactivated.

Product parameters:

– wind speed measuring range: 0.4 ~ 30m/s
– the instrument and the measuring handle are connected by a cable with a flexible winding
– large selection of speed units
– measurement of maximum, minimum or average values
– temperature measuring range: -10°C ~ 50°C
– selection of units: °C or °F
– display backlight: yes

Technical parameters:

– wind speed measuring range: 0.4 ~ 30m/s, resolution 0.1m/s, accuracy ± (5% measurement +0.5)
– wind speed measuring range: 1.4 ~ 108km/h, (for guidance only), accuracy ± (5% of measurement +15 digits)
– wind speed measuring range: 0.7 ~ 58 knots, (for guidance only), accuracy ± (5% of measurement +10 digits)
– wind speed measuring range: 0.8 ~ 67mp/h, (for guidance only), accuracy ± (5% of measurement +10 digits)
– wind speed measuring range: 78 ~ 5905ft/min, (for guidance only), accuracy ± (5% of measurement +180 digits)
– range of wind speed measurement according to Beaufort scale: 0 ~ 15 degrees, (for guidance only), accuracy ± 1 degree
– sampling frequency: 2 measurements per second
– temperature measurement range: -10°C ~ 50°C, resolution 0.1°C, accuracy ± 2°C (14°F ~ 122°F, resolution 0.2°F, accuracy ± 4°F
– measurement of maximum, minimum or average values: MAX/MIN/AVG is displayed
– overload indicator “OL”: if the wind speed is greater than 45m/s or the temperature is lower than -10°C or higher than 50°C, “OL” is displayed.
– “WIND CHILL” warning: if the temperature is below 0°C and the wind speed is higher than 5 m/s, the “WIND CHILL” warning is displayed.
– type of wind speed sensor: on the principle of magnetic induction
– temperature sensor type: negative temperature coefficient, NTC
– measurement pause: HOLD is displayed
– display backlight: yes, can be switched on/off
– automatic shut-off: yes, after 5 minutes of inactivity, can be deactivated for continuous operation
– battery discharge indication: when the voltage drops to 3.0 ~ 3.5V
– battery powered: 3x 1.5V batteries (AAA)
– device dimensions: 120mm x 53mm x 43mm
– weight of the device: 365g
– the device is intended for: indoor use
– working temperature and humidity: 0°C ~ 40°C (relative humidity less than 80%), 40°C ~ 50°C (relative humidity less than 45%)
– altitude: 2000m
– storage temperature and humidity: -20°C ~ 60°C (relative humidity less than 75%)

Package contents:
– UNI-T UT363S anemometer in blister
– 1.5V battery (AAA): 3pcs
– instructions for use

Wholesale packaging:
– standard quantity per carton: 20pcs
– standard carton dimensions: 550 mm x 295 mm x 350 mm
– standard gross carton weight: 7.2 kg

MANUFACTURER: UNI-TREND
https://www.uni-trend.com/