Oscilloscope UNI-T UPO1202

Description

This product comes with a 3-year warranty.

The UPO1202 series digital phosphor oscilloscope adopts the innovative UNI-T Ultra Phosphor 2.0 with a new improved appearance and deep storage function, high-speed waveform acquisition, real-time waveform recording and playback, and 256 grayscale display. The series supports DVM module, rich bus triggering and decoding functions, and supports hardware real-time decoding with full memory. It is widely used in many fields, including embedded system design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, R&D, and education.

Product parameters:

– Automatic measurement of many parameters
– Split screen function
– Math functions of addition, subtraction, multiplication, division and FFT

– Ultra Phosphor 2.0:
Normal waveform capture rate up to 100,000 wfms/s, in Fast Acquire mode, the waveform capture rate reaches 500,000 wfms/s

– Long recording memory length:
56 Mpts recording memory length for full frequency domain information at high sampling rates

– Multi-Scopes 2.0:
Multi-Scopes 2.0 can separate the time base and voltage grid of two channels, so that users can simultaneously observe two completely different signals in the same window

– Full-memory hardware real-time decoding:
Full-memory hardware real-time decoding, highly efficient analysis: With 56 Mbps deep storage, the decoding speed reaches 3 protocols (RS232/UART, I2C, SPI) milliseconds, which is 100 times faster than traditional software decoding and greatly improves analysis efficiency

Technical parameters:

– Oscilloscope type: digital
– Power supply: 100V-240V AC, 50/60Hz
– Number of channels: 2 analog
– Bandwidth: 200 MHz
– Real-time sampling rate: 1GSa/S
– Rise time: ≤1.8 ns
– Record memory length: 56Mpts
– Input impedance: 1MΩ/16pF
– Input sensitivity: 500µV/div…20V/div
– Included bus protocols: RS232, UART, I2C, SPI
– Trigger: rising edge, Nth Edge, window, pattern, runt, falling edge, delayed, pulse width, slope, timeout, video signal
– time base: 1n…1pc/div
– vertical resolution: 8bit
– optional bus protocols: None
– type of display used: LCD TFT 7″
– dimensions for transport (L x W x H): 336 mm × 164 mm × 105 mm
– transport weight: <2.5 kg Package contents:
– power cable
– USB 2.0 cable
– 100MHz probe*2 (UT-P04)

Manufacturer: UNI-T

SOFTWARE&FIRMWARE
https://instruments.uni-trend.com/products/digital-oscilloscopes/UPO1002